Amplifier TTL input pinout and connector typeAlex Mitsar2024-11-28T22:14:11+03:00
Skip to main content
You will see event mark from TTL input on the button of EEG screen.
How Can We Help?
-
WinEEG research software
-
Mitsar-EEG systems
- Amplifier functional test / Calibration signal.
- Amplifier TTL input pinout and connector type
- AUX channel for stimuli detection or event marks.
- D-Sub EEG cap connector pinout
- ECG/EOG/EMG biosignals recording
- Mitsar-EEG-BT reference electrode options
- WinEEG activation with code
- WinEEG dongle setup / checking your license
-
Other
-
SmartBCI wireless EEG
-
Troubleshooting
-
Electrodes and accessories
-
Neurofeedback
-
Event Related Potentials (ERP)
- ERP calibration procedure for Mitsar-EEG-BT
- ERP calibration procedure w/ SmartBCI and SmartSYNC module
- ERP dialog window tips
- Independent components (ICA) of ERPs
- Subject response (patient button) processing setup for ERP analysis.
- What information is in EDF+ annotations?
- What labels are exported to EDF+?
- WinEEG and e-Prime connection
- WinEEG and Psytask setup for ERP
-
EEGStudio
Amplifier TTL input pinout and connector type
Posted
Updated
ByAlex Mitsar
WIKI:
You can use yellow LEMO plug on the front on the amplifier box to obtain digital event marks from third-party devices. This is 2 channel TTL input of the amplifier.
LEMO connector type on amplifier side: PKA.M0.5GL.NJ
Connector pinout:
1 – GND
2 – EVENT1
3 – EVENT2
LEMO connector type for cable: PAA.M0.5GL.AC39J
Table of Contents
